UK 2 pin Plug to figure 8
Product Details
Technical requirements
1. All materials must comply with the latest ROHS&REACH standards and environmental protection requirements
2. The mechanical and electrical properties of plugs and wires must comply with the BS1363-1 standard
3. The writing on the power cord must be clear, and the appearance of the product must be kept clean
Electrical performance test
1. There should be no short circuit, short circuit and polarity reversal in the continuity test
2. The pole-to-pole withstand voltage test is 2000V 50Hz/1 second, and there should be no breakdown
3. The pole-to-pole withstand voltage test is 4000V 50Hz/1 second, and there should be no breakdown
4. The insulated core wire should not be damaged by stripping the sheath
More introduction about this item
1. Environmental PVC material Jacket
Insulation is used outside the environmental protection of hard
Polyvinyl chloride material wire safety, wear, durable and avoid around
2. Oxygen-free copper wire core
Conductor with oxygen-free copper wire core, conductive
Good, small resistance, anti-oxidation, fast and stable transmission
3. Standard word tail socket
Universal word tail interface, the internal use of pure copper plug combination,
Resistant to plug, practical and safe
4. Plug with safety tube
The safety tube protects the safety of daily electricity
5. New tinned copper
Effectively ensure good contact with the product good electrical conductivity
6. Epidermis / Plug / Copper core
Achieve extraordinary quality
FAQs
Yes. There're kinds of power cord, usb cable, wire harness, HDMI cable and home appliance will be the main products line of Dongguan Komikaya Factory. The OEM bulk order will be accepted as well.
All the products will have 12 months Warranty
Yes .The order information and photos at different production stage of your order will be sent to you and the information will be updated in time.
Wire and terminal tension standard table
Wire Gauge | Fixing force above KG | Number of core wires |
32# | 0.8 | |
30# | 1.0 | 7/0.1 |
28# | 1.5 | 7/0.127 |
26# | 2.5 | 7/0.16 |
24# | 4.0 | 11/0.16 |
22# | 5.0 | 17/0.16 |
20# | 9.0 | 21/0.178 |
18# | 13.0 | 34/0.178 |
16# | 18.0 | 26/0.25 |
14# | 27.0 | 41/0.25 |
12# | 35.0 | 65/0.25 |