Top Quality Customized color 12V 1A 12W DC Power adapter
SPECIFICATION FOR APPROVAL
Switching power Supply
Product Name: Input:100~240VAC 50/60Hz Output:12VDC 1A
Model No:1201000K
1、 DESCRIPTION:
This specification is suitable for 1201000K switching power supply.S
The purpose of the document is to specify the functional requirements of at 12W switching power supply.
2、INPUT CHARACTERISTICS:
2.1 Input Voltage:
Rated Voltage:100-240Vac
Variation Range:90-264Vac
2.2 INPUT FREQUENCY:
Rated Frequency: 50/60Hz.
Variation Frequency:47-63Hz
2.3 INPUT CURRENT:
0.35Amps max At any input voltage and rated, DC output rated load.
2.4 INRUSH CURRENT:
When the output of the rated load, the ambient temperature is 25℃, input from 240Vac cold machine without damage to
2.5 AC LEAKAGE CURRENT
0.25mA Max. at 240Vac input.
3、OUTPUT CHARACTERISTICS:
3.1 Power output
|
Voltage |
Min. Load |
Rated. Load |
Peak |
Output power |
|
12Vdc |
0.01A |
1A |
|
12W |
3.2 Combined Load/Line Regulation
|
Voltage |
Min. Load |
Rated. Load |
Load Regulation |
Voitage range |
|
12dc |
0.01A |
1A |
11.4V-12.6V |
±5% |
3.3 Ripple and Noise:
At 115/230Vac input and output Min and Max.Load, the ripple and noise are as follows when measure with Max.Bandwidth of 20MHz and Parallel 47uF/0.1uF,crossed connected at testing point.
Voltage Ripple and Noise(Max.)
+12Vdc 200 mV p-p
3.4 Turn on delay time:
3Seconds Max.at 230Vac input and output Max.load.
3.5 Rise time:
40 mS Max.at 115Vac input and output Max load.
3.6 Hold up time:
5 mS Min.at 115Vac input and output Max.Load.
3.7 Effiviency
82.96%Min, At 115/230Vac input voltage,1/4，1/2，3/4 and full load calculation average efficiency.
Adapter meet efficiency level VI 。
3.8 Overshoot:
15% Max.When power supply at turn off/on.
4、PROTECTION FUNCTION:
4.1 Short circuit test:
The power supply will be auto recovered when short circuit faults remove.
4.2 Over current Protection:
The power supply will be auto recovered when over current faults remove.
5、ENVIRONMENTAL REQUIREMET:
5.1 Operating Temperature:
0℃ to 40℃,Full load, Normal operation.
5.2 Storage Temperature:-20℃ to 80℃
With package
5.3 Relative Humidity:
5%(0℃)~90%(40℃)RH,72Hrs,Full load, Normal operating.
5.4 Vibration:
1. Test Standard: International Electrotechnical and Electronic Commission
Operating: IEC 721-3-3 3M3
5~9Hz,A=1.5mm
(9~200Hz,Acceleration 5m/S2)
2. Transportation:
IEC 721-3-2 2M2
5-9Hz,A=3.5mm
9~200Hz, Acceleration=5m/S2
200~500Hz, Acceleration=15m/S2
3. Axial vibration/Axes,10 cycles per axis.
No permanent damage may occur during testing.
The SAMPLE has to restore to its original situation after power off/on.
6、SAFETY REQUIREMENT:
6.1 DIELECTRIC STRENGTH Hi-Pot
Primary side to secondary side: AC3000V, maximum 5mA max, standard test for 1 minute, mass production test 3000V 5mA for 3 seconds.
7、 MECHANICAL REQUIREMENT:
Shell korean black
