Products

Open Frame Power Supply 180W 300W Watt Series china manufacturer

Specifications for this item

* Ultra small shape design, easy to install.

* Full load operation, low temperature rise.

* Meet safety requirements, and isolation withstand voltage is greater than 1500VAC.

* Economical and practical, stable quality, low ripple processing.

* Optional synchronous rectification technology, higher efficiency and lower temperature rise.

* The output short circuit, over current and over power protection functions are perfect.


Product Detail

Product Tags

Electrical Parameters/Specifications:

       Model No MA300-12V15A MA300-24V12A MA300-36V8A MA300-48V6A
Output       DC voltage                               12V 24V 36V 48V
Rated current                           15A 12.5A 8.3A 6.25A
Current range                     0-15A 0-12.5A 0-8.3A 0-6.25A
rated power                           180W 300W 300W 300W
Ripple and Noise (Maximum) 120mVp-p 150mVp-p 200mVp-p 200mVp-p
Voltage accuracy ±3% ±3% ±3% ±3%
Linear adjustment rate ±0.5% ±0.5% ±0.5% ±0.5%
Load Regulation ±1% ±1% ±1% ±1%
Efficiency (TYP) 82% 88% 88% 88%
Cooling method Forced air cooling, (fan air volume must be greater than 10CMF)
Start-up, rise time                 1500ms,30ms/220VAC  2500ms,30ms/110VAC(full load)
 Input        voltage range                     VAC100-240V  (Please refer to "Derating Curve")
Frequency Range                    50Hz/60Hz
AC current (TYP) 1.7A/220V,3A/110V 2.7A/220V,/3A/110V
Inrush current (TYP)  COLD START 35A
leakage current                           <2mA/240VAC
Current
Protection 
short circuit Protection mode: hiccup mode, automatic recovery after abnormal condition is removed
over current 110%~200% of rated output current
over power 110%~200% of rated output power
Environmental Operating temperature ﹣20~﹢60℃ (Please refer to "Derating Curve")
Working humidity                     20~90%RH, no condensation
Storage temperature and humidity                    ﹣40~﹢85℃,10~95%RH
Vibration resistant                       10~500Hz, 2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
security Pressure resistance I/P-O/P:1.5KVAC
Insulation resistance I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
Mechanical Size (L*W*H) 147*70*45mm(L*W*H)
weight About 0.8Kg/PCS

 

Remarks:

Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.

Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.

Accuracy: including setting error, linear adjustment rate and load adjustment rate.

Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test. 

Load regulation measurement method: From 0% to 100% rated load.

The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.

Derating Curve

Static Characteristic Curve

Derating curve-1
Derating curve-2

*Mechanical Dimension Drawing: unit MM

*Power Circuit Diagram:


  • Previous:
  • Next:

  • Write your message here and send it to us