On-board push-to-start high-frequency vehicle antenna factory
Product parameters:
SPECIFICATION: 1C*26AWG+B | ||
ITEM | SPECIFICATION | |
CONDUCTOR | AWG | 26AWG |
MATERIAL | BARE COPPER | |
COND.SIZE | 10/0.14 ±0.008mm | |
MIN.AVG.THICK | 0.90mm | |
INSULATION | MATERIAL | LD-PE |
O.D | 2.8±0.10mm | |
NO. | IC | |
BRAID | MATERIAL | BARE COPPER |
SIZE | 16*8/0.08 ±0.008mm | |
MIN.AVG.THICK | 0.75mm | |
JACKET | MATERIAL | HALF MATT PVC |
COLOUR | UL813 BLACK | |
O.D | 5.00±0.15mm |
Technical requirements:
1. OD5.0 PVC outer is wrapped:
2. Meet environmental protection requirements;
3. Meet the environmental requirements of +100℃~-40℃;
4. The waterproof grade meets the IP67 standard;
5. The japan standard wire is implemented with reference to the JASOD611 standard;
6. Material fire rating A0;
7. The total length difference between the two wires should not exceed 5mm;
8. 4P connector insertion force and pull-out force are not more than 80N,
The holding force is not less than 100N.
TEST:
1.100% conduction, no short circuit, open circuit, instantaneous disconnection and dislocation.
Package:
1.bundles of 25 per pack , wrap it with packing film at about 50mm from both ends, and put it into the carton in a "U" shape
Remarks:
1. All materials are environmentally friendly materials;
2. (D) Size is the key control and size.