Products

KIWI,ground wire,MC373FV automotive wire harness cable manufacturer

Specifications for this item

Model No: KY-C116

Product Name: Automotive wire harness

①φ6.5 ground ring (TFDJ13-D6 (Fundi)) 16-20 square

②φ9.0 ground ring T belt buckle (ST0602B-9-25-145 (Zhongzhi)) 20-25 square

③φ14*30 black heat shrinkable sleeve

④Tinned copper braided network cable: 48/30/1/0.15-25mm2 (Wall)

⑤180mm mini belt (black) (oval)

⑥PE transparent bag Length: 195*width: 120mm Material thickness: 0.07mm (with a hole in the middle of the seal)


Product Detail

Product Tags

TEST:

1.100% test continuity, dislocation, open circuit, short circuit.

Picture-3
gPicture-7
gPicture-5

Package:

1. Each 20PCS finished product is bundled and fixed with PE film, and packed into (3040016101) white transparent PE bag (width: 324mm, thickness: 0.06mm. The length is subject to the actual demand)

2. Blue plastic basket (turnover/recycling, 54x42x24cm) (part number: ********) The packing is subject to the actual, ordinary hollow board, the thickness of the upper and lower flat plates is 0.5mm, the total thickness is 5mm, and the length is 520mm* 400mm wide, blue.

Remarks:

1. All materials must meet the "ROHS" requirements.

2. The tensile force of terminals and wires conforms to the corresponding standards in QC/T29106-2014.

3. The wire rod requires high temperature of 200 °C and low temperature of -50 °C to prevent damage.

4. There should be no damage, burrs, sharp corners, uneven coating, etc. on the surface of the terminal..


  • Previous:
  • Next:

  • Write your message here and send it to us