Products

Factory Supply 60W Customized Open Frame Power Supply

Specifications for this item

* Ultra small shape design, easy to install

* Full load operation, low temperature rise

* Meet safety requirements, and isolation withstand voltage is greater than 3000VAC

*Compliant with EMC design, can be certified, low ripple processing.

*Optional synchronous rectification technology, higher efficiency and lower temperature rise.

* Output short circuit, over current, over power protection functions are perfect.


Product Detail

Product Tags

Electrical Parameters/Specifications:

Model No TASC65-24V2.5A
Output       DC voltage                             24V
voltage range                             22.5V~26.5V
Rated current                           2.5A
Current range                        0~2.5A
Rated power                         60W
Ripple and Noise (Maximum) 120mVp-p
Voltage accuracy ±3%
Linear adjustment rate ±0.5%
Load Regulation ±1%
Efficiency (TYP) 87%
Voltage adjustment range not adjustable
Start-up, rise time                    1500ms,30ms/220VAC  2500ms,30ms/110VAC(full load)
Input         voltage range                          VAC100-240V  VDC127~370V (Please refer to "Derating Curve")
Frequency Range                    50Hz/60Hz
AC current (TYP) 0.55A/220VAC,1.1A/110V
Inrush current (TYP) COLD START 45A
leakage current                           <2mA/240VAC
Current
Protection   
short circuit Protection mode: hiccup mode, automatic recovery after abnormal condition is removed
over current 110%~200% of rated output current
over power 110%~200% of rated output power
Environmental Operating temperature ﹣20~﹢70℃ (Please refer to "Derating Curve")
Working humidity                   20~90%RH, no condensation
Storage temperature and humidity                    ﹣40~﹢85℃,10~95%RH
Vibration resistant                          10~500Hz, 2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
Safety and Electromagnetic Compatibility       safety regulations Refer to CE, CCC, IT, general standard design for home appliances (requires a complete product test to confirm whether it passes)
Pressure resistance I/P-O/P:3KVAC
Insulation resistance I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
Electromagnetic Compatibility Emissions Refer to CE, CCC, IT, general standard design for home appliances (requires a complete product test to confirm whether it passes)
Electromagnetic Compatibility Immunity Refer to CE, CCC, IT, general standard design for home appliances (requires a complete product test to confirm whether it passes)
Mechanical Size (L*W*H) 101.6*50.8*31mm(L*W*H)
weight About 0.55Kg/PCS

Remarks:

Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.

Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.

Accuracy: including setting error, linear adjustment rate and load adjustment rate.

Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.

Load regulation measurement method: from 0% to 100% rated load.

The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.

Derating Curve

Static Characteristic Curve

Picture-1

*Mechanical Dimension Drawing: unit MM

*Power Circuit Diagram:


  • Previous:
  • Next:

  • Write your message here and send it to us