factory Outlets for C13 Ac Power Cable - EU 2pin Plug to figure 8 – Komikaya

Product Details

Technical requirements

1. All materials must comply with the latest ROHS&REACH standards and environmental protection requirements

2. The mechanical and electrical properties of plugs and wires must comply with the ENEC standard

3. The writing on the power cord must be clear, and the appearance of the product must be kept clean

Electrical performance test

1. There should be no short circuit, short circuit and polarity reversal in the continuity test

2. The pole-to-pole withstand voltage test is 2000V 50Hz/1 second, and there should be no breakdown

3. The pole-to-pole withstand voltage test is 4000V 50Hz/1 second, and there should be no breakdown

4. The insulated core wire should not be damaged by stripping the sheath

More introduction about this item

1. Environmental PVC material Jacket

Insulation is used outside the environmental protection of hard
Polyvinyl chloride material wire safety, wear, durable and avoid around

2. Oxygen-free copper wire core

Conductor with oxygen-free copper wire core, conductive
Good, small resistance, anti-oxidation, fast and stable transmission

3. Standard word tail socket

Universal word tail interface, the internal use of pure copper plug combination,
Resistant to plug, practical and safe

4. Plug with safety tube

The safety tube protects the safety of daily electricity

5. New tinned copper

Effectively ensure good contact with the product good electrical conductivity

6. Epidermis / Plug / Copper core

Achieve extraordinary quality

FAQs

What’s the leading time? (How long do you need to prepare my goods)?

The samples delivery (no more than 10pcs) will be arranged within 7days after payment, and the lead time for mass production will be 15-20 day after payment.

Can you put my brand name (logo) on these products?

Yes! The professional OEM services will be welcomed to us.  Our factory accepts to make the logo free for bulk orders.

Scope of application

Instructions

1. Turn on the power of the 8681 continuity tester (power button ON/OFF is at the back of the body), the power indicator light is on

2. The input end of the test fixture inserts into the output socket of the tester, check whether the fixture is in good condition at the same time

3. The performance of the continuity tester should be calibrated and debugged by a technician before operation. The test items include: (1) Short-circuit test, continuity resistance test, insulation test, and instantaneous short/open-circuit test

4. Test parameters (refer to the requirements of the engineering drawings, if no required according to the SOP standard) Voltage: 300V

5. Number of test points: at least 64 (L/W category) (3) Test specifications: 2MΩ (4) Short/open circuit judgment value: 2KΩ

6. Instantaneous short/open-circuit test time: 0.3 seconds (6) Conduction cathodic reactance: 2Ω (L/W category

7. Start test after the quality controller confirmed that the product are qualified. Insert the rubber shell’s both ends into the test socket horizontally. When the horn sounding and the green light is on, it’s judged as a qualified product, otherwise, it’s a defective product
once the red indicator light is on and the whine is heard.

8. The first tested product must be confirmed by quality controller before mass production