Customized Gps signal amplification harness cable assembly manufacturer
Technical requirements:
1. High temperature test: high temperature +85℃48H is performed according to GB/T242312008:
2. Low temperature test: low temperature -40 ℃ 24H according to GB/T242312008:
3. Temperature shock test: test temperature: -40℃~+85℃, holding time: 0.5H, conversion time: within 5min, cycle 20 times;
4. Product appearance requirements: no scratches/impurities/color mixing/dirt/poor scratches/deformation/sink marks/lack of material.
5. Unmarked dimensional tolerance: according to GB/T1804-2000c level.
6. The parts assembly meets GB30512 "Requirements for Prohibited Substances in Road Vehicles".
7. The parts assembly meets GB/T26988 "Automotive Parts Recyclability Marking" and QC/T797 "Material Identification and Marking of Automotive Plastic, Rubber and Thermoplastic Elastomer Parts", citing the latest standard.
8. All materials are environmentally friendly materials; the marked length is the exposed size: all the marked sizes need to be strictly controlled.
9. 100% conduction, no short circuit, open circuit, instantaneous disconnection and dislocation.
10. Important symbols:
Remarks:
1. The label changes according to the rules;
2. Packing: 1 bundle per 10 strips (front, middle and end 3 parts) wrapped with wire wrapping film.
3. The binding straps appear in the same direction, and the outlet ends are parallel to the fixed seat.
